Revision as of 05:43, 30 May 2011 by imported>Plastikspork
[[Category:Infobox templates|Template:Remove first word ]]
 | This template uses Lua:
|
Template:Infobox connector is an infobox for electrical and (audio/video) signal connectors of all kinds.
The template supports three images:
- image, logo, pinout_image
Image and logo share a 300 pixel wide area - so if both are used then the width of the image should be set to 150 pixels, that is, [[Image:example.jpg|150px]]. If only image and pinout are used, then the size of both should be 300 pixels.
Usage
Template:Parameter names example
{{Infobox connector
| name =
| type =
| image =
| logo =
| caption =
| designer =
| design_date =
| manufacturer =
| production_date =
| superseded =
| superseded_by =
| superseded_by_date =
| weight =
| length =
| diameter =
| width =
| height =
| hotplug =
| daisy_chain =
| external =
| electrical =
| earth =
| maximum_voltage =
| maximum_current =
| audio_signal =
| video_signal =
| data_signal =
| data_bit_width =
| data_bandwidth =
| data_devices =
| data_style =
| cable =
| high_freq =
| physical_connector =
| num_pins =
| pinout_col1_name =
| pinout_col2_name =
| pinout_image =
| pinout_caption =
| pinout_image2 =
| pinout_caption2 =
| pin1 =
| pin1_name =
| pin2 =
| pin2_name =
| pin3 =
| pin3_name =
| pin4 =
| pin4_name =
| pin5 =
| pin5_name =
| pin6 =
| pin6_name =
| pin7 =
| pin7_name =
| pin8 =
| pin8_name =
| pin9 =
| pin9_name =
| pin10 =
| pin10_name =
| pin11 =
| pin11_name =
| pin12 =
| pin12_name =
| pin13 =
| pin13_name =
| pin14 =
| pin14_name =
| pin15 =
| pin15_name =
| pin16 =
| pin16_name =
| pin17 =
| pin17_name =
| pin18 =
| pin18_name =
| pin19 =
| pin19_name =
| pin20 =
| pin20_name =
| pin21 =
| pin21_name =
| pin22 =
| pin22_name =
| pin23 =
| pin23_name =
| pin24 =
| pin24_name =
| pin25 =
| pin25_name =
| pin26 =
| pin26_name =
| pin27 =
| pin27_name =
| pin28 =
| pin28_name =
| pin29 =
| pin29_name =
| pin30 =
| pin30_name =
| pin31 =
| pin31_name =
| pin_custom1_name =
| pin_name_custom1 =
| pin_custom1 =
| pin_custom2_name =
| pin_name_custom2 =
| pin_custom2 =
| pin_custom3_name =
| pin_name_custom3 =
| pin_custom3 =
| pin_custom4_name =
| pin_name_custom4 =
| pin_custom4 =
| pin_custom5_name =
| pin_name_custom5 =
| pin_custom5 =
| pin_custom6_name =
| pin_name_custom6 =
| pin_custom6 =
| pin_custom7_name =
| pin_name_custom7 =
| pin_custom7 =
| pin_custom8_name =
| pin_name_custom8 =
| pin_custom8 =
| pinout_notes =
}}
Example
D4 Video connector
  This example is not factual – it is purely illustrative of the infobox. |
Type |
Analogue video connector |
---|
Production history |
---|
Designer |
Some guy |
---|
Designed |
Early 1990s |
---|
Manufacturer |
Initially Toshiba |
---|
Produced |
Early 1990s to 2005 |
---|
Superseded |
RF connector |
---|
Superseded by |
DVI connector (2005) |
---|
General specifications |
---|
Length |
36 mm (typical) |
---|
Width |
25 mm |
---|
Height |
6.5 mm |
---|
Hot pluggable |
Yes |
---|
External |
External |
---|
Audio signal |
None |
---|
Video signal |
Analogue 480i, 480p, 720p, 1080i |
---|
Cable |
14 core shielded (25 m max) |
---|
Passband |
0–20 GHz |
---|
Pins |
14 (6 video, 3 reserved, 2 detect, 3 data) |
---|
Connector |
DB-25 |
---|
Electrical |
---|
Signal |
220 volts AC 50 Hz typically |
---|
Earth |
Dedicate pin |
---|
Max. voltage |
450 volts peak |
---|
Max. current |
20 amps at 220 volts, 5 amps at 400 volts |
---|
Data |
---|
Data signal |
Resolution and Aspect ratio only |
---|
Width |
2 bits |
---|
Bitrate |
120 bit/s |
---|
Max. devices |
1 |
---|
Protocol |
Serial |
---|
Pin out |
---|
 |
A male connector seen from the front. |
Pin |
Spec name |
Example col title |
---|
Pin 1 |
Y |
luminance (0.7 V, 75 Ω) |
---|
Pin 2 |
Y GND |
Y ground |
---|
Pin 3 |
Pb |
0.35 V, 75 Ω |
---|
Pin 4 |
Pb GND |
|
---|
Pin 5 |
Pr |
0.35 V, 75 Ω |
---|
Pin 6 |
Pr GND |
|
---|
Pin 7 |
|
Reserve link 1 |
---|
Pin 8 |
Data line 1 |
0 V = 525 lines 2.2 V = 750 lines 5 V = 1125 lines |
---|
Pin 9 |
Data line 2 |
0 V = 59.94i / 60i 5 V = 59.94p / 60p |
---|
Pin 10 |
|
Reserve link 2 |
---|
Pin 11 |
Data line 3 |
0 V = 4:3 2.2 V = 4:3 letterbox 5 V = 16:9 |
---|
Pin 12 |
Plug insert detect ground |
|
---|
Pin 13 |
|
Reserve link 3 |
---|
Pin 14 |
Plug insert detect |
output 10 kΩ, input > 100 kΩ |
---|
C1 |
BLUE |
Analog Blue Video |
---|
C2 |
GREEN |
Analog Green Video |
---|
C3 |
HA_SYNC |
Analog Horizontal Sync |
---|
C4 |
RED |
Analog Red Video |
---|
C5 |
RETURN |
Analog RGB Return and DDC Return |
---|
C6 |
AR_PRE |
Acid reflux preventer |
---|
C7 |
AR_ENC |
Acid reflux encourager |
---|
C8 |
CHRO |
Churro presence detect |
---|
These are some notes about the pinout of this connector. The pins are razor sharp. |
[[Category:Infobox templates|
Template:Remove first word ]]
{{Infobox connector
| name = D4 Video connector
| image = [[File:SCART 20050724 002.jpg|150px]]
| logo = [[File:D4 connector.png|150px]]
| caption = This example is not factual – it is purely illustrative of the infobox.
| type = [[analog electronics|Analogue]] video connector
| designer = Some guy
| design_date = Early 1990s
| manufacturer = Initially [[Toshiba]]
| production_date = Early 1990s to 2005
| superseded = [[RF connector]]
| superseded_by = [[DVI connector]]
| superseded_by_date = 2005
| external = External
| hotplug = Yes
| length = 36 mm (typical)
| width = 25 mm
| height = 6.5 mm
| electrical = 220 volts AC 50 Hz typically
| earth = Dedicate pin
| maximum_voltage = 450 volts peak
| maximum_current = 20 amps at 220 volts, 5 amps at 400 volts
| audio_signal = None
| video_signal = [[analog signal|Analogue]] [[480i]], [[480p]], [[720p]], [[1080i]]
| data_signal = Resolution and [[Aspect ratio (image)|Aspect ratio]] only
| data_bit_width = 2 bits
| data_bandwidth = 120 bit/s
| data_devices = 1
| data_style = [[Serial communications|Serial]]
| physical_connector = DB-25
| cable = 14 core shielded (25 m max)
| passband = 0–20 GHz
| num_pins = 14 (6 video, 3 reserved, 2 detect, 3 data)
| pinout_image = [[File:D4 connector.png|300px]]
| pinout_caption = A male connector seen from the front.
| pinout_col1_name = Spec name
| pinout_col2_name = Example col title
| pin1 = [[Luminance (video)|luminance]] (0.7 V, 75 Ω)
| pin1_name = Y
| pin2 = Y [[Ground (electricity)|ground]]
| pin2_name = Y GND
| pin3 = 0.35 V, 75 Ω
| pin3_name = Pb
| pin4 =
| pin4_name = Pb GND
| pin5 = 0.35 V, 75 Ω
| pin5_name = Pr
| pin6 =
| pin6_name = Pr GND
| pin7 = Reserve link 1
| pin7_name =
| pin8 = 0 V = 525 lines<br /> 2.2 V = 750 lines<br /> 5 V = 1125 lines
| pin8_name = Data line 1
| pin9 = 0 V = 59.94i / 60i<br /> 5 V = 59.94p / 60p
| pin9_name = Data line 2
| pin10 = Reserve link 2
| pin10_name =
| pin11 = 0 V = 4:3 <br /> 2.2 V = 4:3 letterbox <br /> 5 V = 16:9
| pin11_name = Data line 3
| pin12 =
| pin12_name = Plug insert detect ground
| pin13 = Reserve link 3
| pin13_name =
| pin14 = output 10 kΩ, input > 100 kΩ
| pin14_name = Plug insert detect
| pin_custom1_name = C1
| pin_name_custom1 = BLUE
| pin_custom1 = Analog Blue Video
| pin_custom2_name = C2
| pin_name_custom2 = GREEN
| pin_custom2 = Analog Green Video
| pin_custom3_name = C3
| pin_name_custom3 = HA_SYNC
| pin_custom3 = Analog Horizontal Sync
| pin_custom4_name = C4
| pin_name_custom4 = RED
| pin_custom4 = Analog Red Video
| pin_custom5_name = C5
| pin_name_custom5 = RETURN
| pin_custom5 = Analog RGB Return and DDC Return
| pin_custom6_name = C6
| pin_name_custom6 = AR_PRE
| pin_custom6 = [[Acid reflux]] preventer
| pin_custom7_name = C7
| pin_name_custom7 = AR_ENC
| pin_custom7 = Acid reflux encourager
| pin_custom8_name = C8
| pin_name_custom8 = CHRO
| pin_custom8 = Churro presence detect
| pinout_notes = These are some notes about the pinout of this connector. The pins are razor sharp.
}}
No description.
Template parameters
This template prefers block formatting of parameters.
Parameter | Description | Type | Status |
---|
No parameters specified |